Data Storage

EMC VNXe – Shutdown Procedure

Shutdown via UNISPHERE using the Service Account

vnxe-shutdown

EMC VNXe – Shutdown Procedure | David Ring

Please read all notes provided in the ‘More Information..’ section highlighted in the above image before proceeding with shutdown.

Shutdown process as documented in the ‘More Information..’ section:
1. From Unisphere, select Settings > Service System.
2. Enter the Service password to access the Service System page.
3. Under Service Actions, select Shut Down System.
4. Click Execute service action to shut down the storage processors (SPs).
5. In the Service Confirmation dialog box, click OK.
6. Check the status of the shutdown process by looking at the SP LED indicators. The shutdown process is complete when all the Storage Processor Power LEDs are flashing green, the SP Status Fault LED is solid amber, the network management port LEDs are on, and all other Storage Processor LEDs are off.


Shutdown via SSH using the Service Account:

Shutdown command:
svc_shutdown –system-halt

service@(none) spb:~> svc_shutdown --system-halt
###############################################################################
WARNING: This action will shut down the system and you will have to manually
bring it back up afterwards.
###############################################################################
Enter "yes" if want to proceed with this action: yes
Normal Mode
1
1
Peer shutdown now in progress
System shutdown now in progress

Bir Cevap Yazın

Aşağıya bilgilerinizi girin veya oturum açmak için bir simgeye tıklayın:

WordPress.com Logosu

WordPress.com hesabınızı kullanarak yorum yapıyorsunuz. Çıkış  Yap /  Değiştir )

Twitter resmi

Twitter hesabınızı kullanarak yorum yapıyorsunuz. Çıkış  Yap /  Değiştir )

Facebook fotoğrafı

Facebook hesabınızı kullanarak yorum yapıyorsunuz. Çıkış  Yap /  Değiştir )

Connecting to %s